PVC紫外线吸收剂主要用途 |
添加时间:2018/7/31 16:59:39 浏览次数: |
PVC紫外线吸收剂主要用途:
PVC ultraviolet absorbent main use:
PVC紫外线吸收剂适用于涂料、橡胶、油品等其他需要屏蔽荧光的场合;PVC紫外线吸收剂特别适用于无色透明和浅色制品中。
PVC UV absorbers are suitable for other occasions such as paint, rubber, oil and other situations that need to be screened for fluorescence; PVC UV absorbers are especially suitable for colorless transparent and light colored products.
二. 突出特点:
Two. Outstanding characteristics:
PVC紫外线吸收剂超强的荧光屏蔽效果,大大降低荧光强度、荧光级别;有效降低荧光所带来的各种危害性,大幅度提高产品的抗老化性能。色浅,为无色透明和浅色制品的首选荧光消除剂;PVC紫外线吸收剂不易燃、不腐蚀、贮存稳定性好;PVC紫外线吸收剂与大多数体系相容性良好,兼具长效抗氧、抗黄变作用性能,可与一般抗氧剂并用;极高的安全性。
The ultra strong fluorescent shielding effect of PVC UV absorbers greatly reduces the fluorescence intensity and fluorescence level, effectively reduces the various hazards caused by the fluorescence, and greatly improves the anti-aging performance of the products. Light color, the first fluorescence elimination agent for colorless transparent and light color products; PVC UV Absorbents are not flammable, non corrosive, and good storage stability; PVC UV absorbers have good compatibility with most systems. They have long effective anti oxygen and yellowing properties, and can be used with the general antioxidant and high safety.
三. 理化指标:
Three. Physical and chemical indicators:
PVC紫外线吸收剂外观:淡黄色粉末 熔点:138℃-141℃ 灰分:≤0.05% 挥发分:≤0.1% 透光率:460nm≥95%; 500 nm≥97% 溶解性:溶于苯、甲苯、笨乙烯等溶剂中,微溶于醋酸乙酯、石油醚,不溶于水
PVC UV absorber appearance: light yellow powder melting point: 138 centigrade -141 c ash: less than 0.05% volatile: less than 0.1% light transmittance: 460nm > 95%; 500 nm > 97% solubility: dissolved in benzene, toluene, ethylene, and other solvents, dissolved in ethyl acetate, petroleum ether, insoluble in water
四. 使用方法:
Four. Methods of use:
PVC紫外线吸收剂建议添加量:0.05---0.5%。
PVC UV absorber recommended dosage: 0.05---0.5%.
五. 注意事项:
Five. Note:
PVC紫外线吸收剂存放于阴凉、干燥、通风处;防止受潮、受热
PVC UV absorbers are stored in cool, dry and ventilated places to prevent moisture and heat. |
上一页 粉末涂料紫外线吸收剂的分类与主要化学指标 |
下一页 紫外线吸收剂作用简介 |
Copyright © 技术支持:遨游网络