塑料紫外线吸收剂的介绍 |
添加时间:2018/10/13 16:39:08 浏览次数: |
塑料紫外线吸收剂 橡胶紫外线吸收剂 涂料紫外线吸收剂 油漆紫外线吸收剂 油墨紫外线吸收剂 橡胶紫外线吸收剂 涂料紫外线吸收剂 汽车油漆紫外线吸收剂
UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents, UV Absorbents for automobile paint
主要化学指标:
Main chemical indicators:
外 观:淡黄色粉末
Appearance: light yellow powder
含 量:≥99%
Content: 99%
熔 点:47-49°C
Melting point: 47-49 C
灰 份:≤0.1%透光率:450nm>90% 500nm>95%
Ash: less than 0.1% transmission rate: 450nm>90% 500nm>95%
溶解度:丙酮: 74 苯:72 甲醇: 2 乙醇(95%):2.6正庚烷:40 正己烷:40.1
Solubility: acetone: 74 benzene: 72 methanol: 2 ethanol (95%): 2.6 heptane: 40 hexane: 40.1.
特性和用途:
Characteristics and uses:
紫外线吸收剂是一种性能卓越的高效防老化助剂, 能吸收240-340纳米的紫外光, 具有色浅、无毒、相容性好、迁移性小、易于加工等特点。它对聚合物有最大的保护作用, 并有助于减少色泽, 同时延缓泛黄和阻滞物理性能损失。它广泛用于PE、PVC、PP、PS、PC、有机玻璃、丙纶纤维和乙烯醋酸乙烯酯等方面。而且对于干性酚醛和醇酸清漆 类、聚氨酯类、丙烯酸类、环氧类和其它空气干燥产品及汽车整修漆、粉末涂料、聚氨酯、橡胶制品等, 为它们提供了良好的光稳定效果。用量0.1%-0.5%。
UV absorber is an excellent anti-aging agent with excellent performance. It can absorb ultraviolet light of 240-340 nanometers. It has the characteristics of light color, non-toxic, good compatibility, small mobility and easy to process. It has the greatest protective effect on polymers, and helps to reduce the color and luster and retard the yellowing and block the loss of physical properties. It is widely used in PE, PVC, PP, PS, PC, PMMA, polypropylene fiber and ethylene vinyl acetate. And for dry phenolic and alkyd varnish, polyurethane, acrylic, epoxy and other air drying products and automobile refurbishment, powder coating, polyurethane, rubber products and so on, which provide good light stability effect. The dosage is 0.1%-0.5%. |
上一页 紫外线吸收剂是一种光稳定剂 |
下一页 紫外线吸收剂作用与原理 |
Copyright © 技术支持:遨游网络